0
Follow
0
View

# How to write cmd command file of adams simulation control stability corner step condition?

ya313584699 注册会员
2023-02-28 01:17

You can run Adams emulation by writing a batch file(.bat) or a command-line script(.cmd).
Here is a simple example:
(1) Open Notepad or other text editor and type the following command:

REM 启动Adams

REM 加载模型

REM 运行仿真



(2) Save the above command as a batch file(.bat), for example, adams_simulation.bat.
(3) Place the adams_simulation.bat file in the installation path of the Adams software(e.g. "C:\MSC.Software\Adams\2019"), or add the installation path of the Adams software to the system environment variable.
(4) Double-click on the adams_simulation.bat file and Adams will start and automatically load the model file and run the simulation.

demon909 注册会员
2023-02-28 01:17

To write a ADAMS simulation control stability corner step CMD command file, you can follow the following steps:

1. Open the ADAMS software and load the model file to be simulated.

2. In ADAMS software, manually perform the step simulation operation of the control stability Angle to ensure that the model can run successfully.

3. In ADAMS, open the Command window, type cmd into the window, and press Enter. This opens an ADAMS command window on the CMD command line.

4. On the CMD command line, enter the following command:

run /your/path/to/cmd/file.cmd


among them, / your/path/to/CMD/file. The CMD should replace the actual path for you to save CMD files.

5. Write the CMD command file. In the CMD command file, you need to write a series of ADAMS commands to set simulation parameters, run the simulation, record simulation results, and so on. Here is the code for a sample CMD command file:

reset
solver
runctrl
stop /time/100
output /file/your/path/to/output/file.txt
simulate
quit



In this example CMD file, the reset command is used to clear all Settings; The setup command is used to load the model file to be emulated; The solver command is used to set a numerical solver. The runctrl command is used to set the simulation time and output file. The simulate command is used to run the simulation. The quit command is used to quit ADAMS.

You need to write the appropriate ADAMS commands to set the simulation parameters, run the simulation, record the simulation results, etc., according to your specific simulation requirements.

6. Save the CMD file. Save the CMD command file to a directory of your choice.

7. On the CMD command line, run the CMD command file. On the CMD command line, enter the following command:

run /your/path/to/cmd/file.cmd



among them, / your/path/to/CMD/file. The CMD should replace the actual path for you to save CMD files.

8. Wait for the simulation to finish. On the CMD command line, ADAMS outputs the simulation progress information and the path to the result file.
With the above steps, you can write a CMD command file for ADAMS to simulate the steering stability corner step condition, and run the file in the CMD command line to simulate.

、、、、、、、、、、、、、、、、、、、、、、、、、、、、、、、、、

The

ADAMS CMD command is a command language specifically designed for the ADAMS software to perform various operations and tasks of the ADAMS software. These commands can be entered in the GUI interface of the ADAMS software, or they can be executed by opening the ADAMS command line window with the "startcmd" command in the Windows command prompt.

The

ADAMS command language is similar to a scripting language and contains a variety of commands that can be used to control various aspects of the ADAMS simulation model, such as controlling simulation time, setting initial conditions, defining motion controllers, defining output results, and so on. By writing CMD command files, you can use ADAMS command to automate a series of ADAMS simulation tasks, improving simulation efficiency and accuracy.

Note that there is a difference between the ADAMS command language, which is a specific command language within the ADAMS software, and the CMD command in the Windows command prompt, which is the command-line interpreter in the Windows operating system. Although you need to enter the commands in the Windows command prompt to run the ADAMS CMD command, these commands are actually interpreted and executed by an interpreter inside the ADAMS software. Therefore, if you want to write the ADAMS CMD command file, you need to know the syntax and usage of the ADAMS command language.

dafeng2006 注册会员
2023-02-28 01:17

Reference to gpt and their own ideas, to write adams simulation control stability corner step cmd command file, need to follow the following steps:

Open the Adams Command Window and run the Adams command through the window.
Enter command line commands in the Adams command window to perform actions such as loading model files, defining simulation conditions, defining simulation parameters, and so on.
Saves the command line command to a text file, which is the cmd command file.
Here is an example Adams simulation control stability corner step cmd command file:


; Example Adams command file for simulating step response of an aircraft
; with control surfaces
; Set the simulation parameters
SIMULATION SET TIME=10.0
SIMULATION SET DT=0.01
SIMULATION SET GROUND=0
SIMULATION SET CONTROL=1
; Set the control parameters
CONTROL SET VARI NAME=aileron, VALU=0.0
CONTROL SET VARI NAME=elevator, VALU=0.0
CONTROL SET VARI NAME=rudder, VALU=0.0
; Define the step response input for the aileron control surface
CONTROL SET STEP NAME=aileron, TIME=2.0, VALU=0.1
; Define the step response input for the elevator control surface
CONTROL SET STEP NAME=elevator, TIME=3.0, VALU=-0.1
; Define the step response input for the rudder control surface
CONTROL SET STEP NAME=rudder, TIME=4.0, VALU=0.1
; Run the simulation
SIMULATION RUN


In this example, the command file first loads an Adams simulation model file named aircraft.adm, then sets the simulation parameters, defines the control parameters, and defines the corner step input signal, and finally executes the simulation.

The command entered in the

Adams command window is the Adams command language. This language is a special command language of Adams simulation software, which is used to control the simulation process of Adams.

da060743 注册会员
2023-02-28 01:17

The answer part of the reference GPT, GPT_Pro better solve the problem
Adams simulation control stability corner step condition cmd command file writing, first need to open ADAMS, Open ADAMS by running cmd through matiab as follows:

adams -g <model_name.cmd>


where < model_name.cmd> Is the cmd file of the model, used to describe the model parameters and working condition information. Secondly, you need to write the simulation condition of the cmd file, used to define the input signal Settings, analysis step Settings, save the output results, control simulation parameters, etc., the specific code is as follows:

// 定义输入信号设置
signal_inputs = {yaw_rate, pitch_angle};
// 设置分析步骤
// 设置控制参数
control_params = {step_time=>0.1, step_size=>0.5};
// 保存输出结果
save_results = true;
// 启动仿真
start_simulation();


Finally, the cmd command that runs adams is a general-purpose command description language, cmd language, which is a set of instructions in text format that can be used to control the behavior of the operating system.

duwei26435753 注册会员

Publish Time
2023-02-28 01:17
Update Time
2023-02-28 01:17